Bosch Appliances 550 Security Camera User Manual


 
MIC Series 550 Camera Unpacking | en 13
Bosch Security Systems, Inc. User Manual F.01U.239.454 | 3.0 | 2012.09
3 Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
3.1 Parts List
The package containing the MIC Series 550 camera should include the following items:
3.2 Additional Products Required
The following table lists additional products, sold separately by Bosch or other
manufacturers, required to operate MIC Series 550 cameras:
3.3 Additional Tools Required
The following table lists additional tools required (not supplied by Bosch):
NOTICE!
Do not stand the canted (45°) MIC Series 550 camera upright as it is unstable unless properly
mounted.
Quantity Part
1 MIC Series 550 or MIC Series 550IR Camera
1 MIC Series 550 User Manual (this booklet)
4 M8 stainless screws and washers
1 Nebar gasket
Quantity Product Part Number Size
1 per MIC550 Shielded Composite Cable for MIC cameras
(See the model numbers and lengths at right.)
MIC-2M-S 2 m
MIC-10M-S 10 m
MIC-20M-S 20 m
MIC-25M-S 25 m
1 per MIC550 Power Supply Unit (PSU) for MIC cameras MIC-240PSU-2,
MIC-115PSU-2,
MIC-24PSU-2
-- Mounting accessories
Quantity Part
1 13 mm wrench for the PCD foot, fixing bolts
1 3 mm screwdriver for the terminal blocks in power supply
1 8 mm screwdriver for fixing screws for MIC Series PSU enclosure
1 No. 2 Phillips screwdriver for adjusting the rain shield, if required
1 Silicone sealant for ensuring a water tight seal [if not using the Nebar gasket]