Filter
Top Products
4 en | Table of Contents MIC Series 550 Camera
F.01U.239.454 | 3.0 | 2012.09 User Manual Bosch Security Systems, Inc.
6.4.2 FastAddress, Pelco Protocols 27
6.5 Setting Passwords 28
6.5.1 Special Passwords 28
6.5.2 Setting Passwords, Bosch Protocol 28
6.6 Configuring the Camera for Inverted Operation 29
7 On-Screen Display (OSD) Menus (Bosch Protocol) 30
7.1 Camera Setup Menu 30
7.2 Lens Setup Menu 33
7.3 PTZ Setup Menu 34
7.4 Display Setup Menu 35
7.5 Communication Setup Menu 37
7.6 Alarm Setup 38
7.7 Language Menu 42
7.8 Diagnostics Menu 42
8 On-Screen Display (OSD) Menus (Pelco Protocol) 45
8.1 Command Lock (locked) 45
8.2 Bosch Menu (locked) 46
8.3 Camera Setup 46
8.4 PTZ Setup (unlocked) 47
8.5 AUX Setup Menu 48
8.6 Other Menus 48
9 Common User Commands (unlocked) 50
9.1 Setting AutoPan Mode 50
9.2 Setting Preset Shots 50
9.3 Specifying a Shot or a Sector Title 50
9.4 Configuring Preposition Tours 51
9.5 Programming the Inactivity Operation 51
9.6 Recording Tours 52
9.7 Using the Wiper/Washer (Bosch Protocol) 52
9.8 Remapping Aux Commands (Pelco Protocol, firmware version 2.10 and higher) 53
9.9 Using the Washer/Wiper (Pelco Protocol) 53
9.10 Configuring Settings for IR Illumination 54
10 Advanced Features 55
10.1 Alarm Rules 55
10.1.1 Controlling Alarm Rules 55
10.1.2 Alarm Rule Examples 55
10.2 Privacy Masking 56
10.3 Image Stabilization 57
10.4 Pre-position Tour 57
10.5 Azimuth, Elevation, and Compass Directions 57
10.5.1 Setting the Azimuth Zero Point 57
10.5.2 Displaying Azimuth, Elevation, and Compass Headings 58