Filter
Top Products
48 en | On-Screen Display (OSD) Menus (Pelco Protocol) MIC Series 550 Camera
F.01U.239.454 | 3.0 | 2012.09 User Manual Bosch Security Systems, Inc.
8.5 AUX Setup Menu
The AUX Setup menu provides an area to remap Aux commands.
8.6 Other Menus
Scan Speed Changes the Autopan and
AutoScan speeds.
Sliding scale: – (1°/sec to 60°/sec) + 30°/sec.
Edit Presets Modifies preset scenes. 1-99 scenes
Limit Stops Toggles the Limit Stops for
AutoScan.
ON or OFF OFF
Recordings Selects record Pattern 1 or
2, if normal pattern
command does not
respond.
“A” or “B” “A”
AutoPivot Follows a subject while
beneath the camera,
without inverting the
picture.
ON or OFF ON
Menu Description Sub-menu / Description Default
Setting
AUX Setup
Exit...
* WASH WIPE
*Alarm Output 2:
* Alarm Output 3
Alarm Output 4
Not Set
Not Set
Not Set
Not Set
* = Factory Setting
Focus / Iris: Select
Menu Description Default
Setting
Edit Password Sets or displays the password. See Section 6.5 Setting
Passwords, page 28.
FastAddress (locked) Sets or changes the address. Not Set
Software Version
(unlocked)
Displays the camera software version.
Ack and Reset Alarms Acknowledges and resets alarms. If there is no active
alarm input, the OSD displays the following message:
“
No Active Alarms.”