Filter
Top Products
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 33
Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08
3 Installing Roof Parapet and Pipe Mounts
3.1 Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the product's Parts List below are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative. See
Section 1.4 Customer Support and Service, page 13 for Customer Support and Service contact
information.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
3.1.1 Parts List
The following table lists the parts included with the Roof Parapet and Pipe mount packages:
3.1.2 Description
This chapter details how to install an AutoDome to a Roof Parapet or to a Pipe mount. Any
differences to the installation between these two mounting systems are noted. See
Section 2 Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts, page 14 for this type
of application.
The VG4-A-9230 Series are stationary mounts intended for rooftop parapet vertical walls. They
are made of light weight aluminum with a corrosion-resistant finish and are used for all Bosch
AutoDome Camera systems up to a rated load of 29 kg (64 lb). These mounts can be fitted to
the inside or outside of parapet walls and can swivel for ease of positioning and for servicing
the AutoDome.
3.1.3 Tools Required
– 5 mm Allen wrench (supplied)
– Small straight blade screwdrivers ~ 2.5 mm (0.1 in.) – 3.1 mm (1/8 in.)
– Medium straight blade screwdriver
– No. 1 and No. 2 Phillips screwdrivers
– Socket wrench and 9/16 in. socket
–Pipe Wrench
– Barrel connector (if installing a fiber optic model)
Mount Kit Options Part Numbers
Parapet (Roof) Mount and
Pipe Mount with one of the following Power Supply Boxes:
VGA-ROOF-MOUNT
VG4-A-9543
– Power Supply Box with 120 VAC transformer
or 230 VAC transformer
VG4-A-PSU1
VG4-A-PSU2
Optional Flat Roof Mount Adapter for VGA-ROOF-MOUNT Mount (not
included)
LTC 9230/01
Pipe Mount with one of the following Power Supply Boxes: VG4-A-9543
– Power Supply Box with transformer 120 VAC
or 230 VAC transformer
VG4-A-PSU1
VG4-A-PSU2
Trim Skirt for Power Supply Box (optional) VG4-A-TSKIRT
Fiber Optic Ethernet Media Converter kit VG4-SFPSCKT