Filter
Top Products
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 35
Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08
Figure 3.1 Wall Mount Power Supply with Optional Trim Skirt
1. Use the wall mount template supplied in the packaging box to locate the four (4)
mounting holes for the Power Supply Box.
2. Drill four (4) holes for the mounting anchors. If installing outdoors, apply a weatherproof
sealant around each hole at the mounting surface.
3. Place the Power Supply Box into the optional Trim Skirt.
4. Secure the Power Supply Box to the wall using four (4) corrosion-resistant stainless steel
studs (not included).
5. Attach the 3/4 in. (20 mm) watertight pipe fittings (not supplied) to the holes of the
Power Supply Box through which you will run the power, video, and control data wires.
NOTICE! A stud diameter of 6.4 mm (1/4 in.) or 8 mm (5/16 in.), able to withstand a 120 kg
(265 lb) pull-out force is recommended.