Filter
Top Products
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 49
Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08
3.8 Attach Pendant to Pipe and Tighten
1. Before attaching the Pendant, visually inspect the Pendant dome and the Interface Board
connectors for any blocked pin holes and bent pins.
2. Tilt the Pendant enough to place its mounting hook on top of the its housing, over the
recessed hinge pin of the Dome Cap.
Figure 3.13 Pendant to Roof / Pipe Mount Attachment
1 Interface Board
2 Retaining Screws (3)
3 Pendant Mounting Screws (2)
CAUTION!
The bubble is packaged with a protective plastic sheet. It is recommended that the bubble
remain stored this way until it is ready to install. Limit handling the bubble, as any scratches
can quickly affect visibility.
1Tilt Dome.
2 Hook and drop.
2a Dome Cap
2b Recessed Hinge Pin
2c Dome Connector
a
b
c