Filter
Top Products
AutoDome 800 Series HD PTZ Camera Cable and Wire Standards | en 51
Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08
4 Cable and Wire Standards
4.1 Power
4.2 Wire Distance Guide for Pendant
Table 4.1 Maximum Wire Distances from Power Supply to AutoDome
4.3 Video and Control Cables
Ethernet
The AutoDome 800 Series models are connected to a 10/100 Base-T network either directly or
via a hub. Both video and control are transmitted over a standard TCP/IP network using the
built-in web server.
Fiber Optic Ethernet Media Converter
The fiber optic media converter is designed to transmit 10/100 Mbps Ethernet signals over
fiber optic cable using 10/100 Mbps Small Form-factor Pluggable (SFP) modules. The SFP
modules are available as multi-mode fiber (MMF) or single-mode fiber (SMF) models with a
single SC connector or dual-fiber with an LC connector. Refer to the VG4-SFPSCKT Fiber Optic
Media Converter Installation Guide.
115/230 VAC
Copper Wire To comply with local codes.
24 V to AutoDome
VA / Watts 14 AWG (2.5 mm) 16 AWG (1.5 mm) 18 AWG (1.0 mm)
800 Series with IVA, Outdoor 60 / 55 58 m (190 ft) 36 m (119 ft) 23 m (75 ft)
CAUTION!
Ethernet connections must be made to non-exposed (indoor) networks only.
Cable Type UTP CAT-5
Maximum Distance 100 m (328 ft)
Bandwidth 10/100 Base-T
Terminal Connector RJ45
Ethernet Media Converter
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port
Full Duplex Optical Port
Fiber Type, MMF 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the
specified optical budget value. Must meet or exceed fiber standard
ITU-T G.651.