Open as PDF
Add New Hardware Wizard or New Hardware Found (Windows 2000)
Wizard displays when the camera is connected to the computer with an
Click [Cancel] to close the window. Temporarily disconnect the camera from the
computer. Next, read Start by Checking This on the previous page and resolve
Images won’t download into a TWAIN-compliant program (Camera and
computer connected via interface cable (Windows 2000, Windows 98 SE)).
Click the [Finish] button in the Camera Control Window to close it.
Cannot download images or shoot remotely. (For cameras connected to
the computer via an interface cable: only cameras supporting Hi-Speed
The problem may be resolved by lowering the transmission speed for data by
following the procedures below.
Hold the MENU button on the camera down and press the (Print/Share)
button and FUNC./SET button simultaneously. In the displayed screen, select [B]
and press the FUNC./SET button.
Camera not detected, Events dialog won’t display or images will not
download to the computer (when camera is connected to the computer
via an interface cable).
There is a problem with one of the items in the Start by Checking This
section (p. 78).
Resolve the problem.
The USB driver is not installed (Windows only).
Install it with the procedures in Installing the Software and USB Driver (p. 10).
The USB driver is not correctly installed (Windows only).
Uninstall the driver (p. 75) before reinstalling it with the procedures in Installing
the Software and USB Driver (p. 11).
SSG.book Page 79 Tuesday, November 22, 2005 12:19 PM