Filter
Top Products
77
1
2
3
5
6
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Auto Mode/Hybrid
Auto Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Cover
Advanced Guide
4
P Mode
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1 Choose [Tracking AF].
Follow the steps in “Changing the AF
FrameMode”(=
76) to choose
[Tracking AF].
[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
Aim the camera so that [ ] is on the
desired subject, and then press the <q>
button.
When the subject is detected, the camera
beeps and [
] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
If no subject is detected, [ ] is
displayed.
To cancel tracking, press the <q> button
again.
3 Shoot.
Press the shutter button halfway. [ ]
changes to a blue [
], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(=
78).
Press the shutter button all the way down
to shoot.
Even after your shot, [ ] is still
displayed and the camera continues to
track the subject.
•[Servo AF] (=
78) is set to [On] and cannot be changed.
•Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
•[AF-Point Zoom] on the [4] tab is not available.
•[e] and [u] are not available.
•The camera can detect subjects even if you press the shutter button halfway
without pressing the <q> button. After your shot, [
] is displayed in the
center of the screen.
•If [Face ID] is set to [On], names will not display when registered people
are detected, but the names will be recorded in the still images (=
42).
However, a name will display if the subject chosen to focus on is the same as
a person detected with Face ID.
C OPY