Filter
Top Products
116
Selecting Print Settings
The procedure for selecting the number of copies is common to all printers. Other print
setting procedures vary depending on your printer model.
Selecting the Number of Copies
A maximum of 99 copies can be selected for each still image.
1. In the print setting menu, select ( , )
(COPIES) and press ( ).
2. Select ( ) the number of copies and press ( ).
Setting the Print Style
Print setting options and [DEFAULT] settings vary depending on the printer
model. For details, refer to the printer’s instruction manual.
[BORDERED]: The image area remains relatively unchanged from the recorded
image when it is printed. [BORDERLESS]: The center portion of the recorded
image is printed at an enlarged size. The top, bottom and sides of the still image
may be slightly trimmed out.
[VIVID], [VIVID+NR] and [NR] can be selected with Canon PIXMA/SELPHY DS
printers.
Canon printers:
When selecting [2-UP], [4-UP], [9-UP] or [16-UP] for [PAGE LAYOUT], set the
[PAPER SIZE] to [10 x 14.8 cm] or [9 x 13 cm]. Canon PIXMA/SELPHY DS
printers: you can also print on the specially designed Photo Stickers sheets.
When selecting [8-UP], set the [PAPER SIZE] to [CREDITCARD]. Canon
PIXMA/SELPHY DS printers: you can also print on the specially designed
Photo Stickers sheets.
PAPER PAPER SIZE Available paper sizes vary depending on the printer model.
PAPER TYPE PHOTO, FAST PHOTO, DEFAULT
PAGE LAYOUT BORDERLESS, BORDERED, 2-UP, 4-UP, 8-UP, 9-UP,
16-UP, DEFAULT
(date print) ON, OFF, DEFAULT
(print effect) ON, OFF, VIVID, NR, VIVID+NR, DEFAULT
DC 20_10_PAL-E.book Page 116 Friday, September 2, 2005 6:36 PM