Canon DC 20 Camcorder User Manual


 
134
Recycling the Built-in Rechargeable Lithium Battery
If you should dispose of your camcorder, first remove the built-in rechargeable lithium
battery for recycling according to the recycling system of your country.
The camcorder has internal components that can produce high voltage. To
reduce the risk of electrical shock, be sure to disconnect all power supply to the
camcorder, remove the battery and wait for at least one and a half months before
starting the procedure to remove the built-in lithium battery. Be sure to read
through the explanation of the whole procedure before starting it.
All the illustrations used below refer to the .
1. Remove all the screws shown in the illustrations with a screwdriver.
2. Remove the top cover and remove
the additional screws under it.
DC 20_10_PAL-E.book Page 134 Friday, September 2, 2005 6:36 PM