Filter
Top Products
125
Trouble?
E
Playing Back the Disc in an External DVD Device
External DVD device refers to DVD players, DVD recorders, computer’s DVD drives and
other digital devices.
Memory Card Operation
Printing
The keys on the wireless
controller do not function.
Check that you did not lay the camcorder on its side so the
omni selector’s button is pressed down. Place the
camcorder upright.
–
Problem Solution
The disc cannot be
recognized by the device. Or,
even though the disc is read,
cannot play back the disc or
the picture is distorted.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth. –
The disc has not been finalized. 96
DVD-RW discs can only be played back in DVD-RW
compatible DVD players and computer drives. Refer to the
instruction manual of your DVD device.
–
Cannot edit my recordings or
add recordings to the disc
with the DVD device.
Discs recorded with this camcorder cannot be edited and
additional recordings cannot be added with an external DVD
recorder or DVD device.
–
When recording on a DVD
disc in the computer an error
message appears.
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery and let the camcorder cool down before resuming use.
–
Problem Solution
Memory card cannot be
inserted.
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
28
Memory card cannot be
recorded.
Insert a memory card. 28
Memory card is full. Erase still images to free some space or
replace the memory card.
92
Memory card standard not defined. Initialize the memory card. 95
The folder and file numbers have reached their maximum
value. Set [FILE NOS.] to [RESET] and insert a new memory
card.
82
Memory card cannot be
played back.
Set the camcorder to . 39
Insert a memory card. 28
Make sure the memory card is selected as the media for still
images.
34
Image cannot be erased. Image is protected. Cancel the protection. 94
“ ” flashes in red. Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Initialize the memory card if flashing
persists.
95
Problem Solution
The printer is not operating
even though the camcorder
and printer are correctly
connected.
1. Set the camcorder to .
2. Disconnect and reconnect the USB cable.
3. Turn off the printer and turn it back on.
–
Problem Solution
DC 20_10_PAL-E.book Page 125 Friday, September 2, 2005 6:36 PM