Canon DC 20 Camcorder User Manual


 
26
Step 6: Setting the Time Zone, Date
and Time
Setting the Time Zone/Daylight Saving Time
1. Turn on the camcorder (CAMERA or PLAY).
2. Press the MENU button to open the menu.
3. Use the omni selector ( ) to select the [D/TIME
SETUP] menu and press ( ).
4. Use the omni selector ( ) to select the [T.ZONE/
DST] option and press ( ).
The time zone setting appears. The default setting is Paris.
5. Use the omni selector ( ) to select your time zone and press ( ) to
save the setting.
To adjust for daylight saving time, select the time zone with the mark next to the
area.
Setting the Date and Time
6. Use the omni selector ( ) to select the [DATE/
TIME] option and press ( ).
The year is displayed in orange.
7. Use the omni selector ( ) to select the year and
push it to ( ) to move to the month setting.
The next part of the date/time is displayed in orange.
Set the month, day, hours and minutes in the same way.
If you do not need to change all settings, you can use the omni selector ( ) to
move to a specific setting you want to change.
8. Press the MENU button to close the menu and start
the clock.
MENU
(77)
D/TIME SETUP T.ZONE/DST
MENU
(77)
D/TIME SETUP DATE/TIME
DC 20_10_PAL-E.book Page 26 Friday, September 2, 2005 6:36 PM