Filter
Top Products
113
E
Using a Memory Card
Notes:
• To use the self-timer ( 75), set the self-timer before step 3, and then
press the PHOTO button fully down.
• The wireless controller’s PHOTO button has no half-way setting. Press the
button fully and the camcorder immediately takes the image.
• When the subject is too bright (overexposure) in CARD CAMERA mode,
OVEREXP. will flash in the display. We recommend that you use the built-in
ND filter to reduce light entering lens.
Open the menu and select CAM. SET UP. Then select ND and set it to
OFF and close the menu.
• When exposure is locked, OVEREXP. does not appear.
The indicators that appear in the display when recording to a
memory card:
>>>> 50
1280
320
FINE
Image quality ( 109)
Backup battery
( 160)
Remaining battery power
( 159)
Number of images that can
still be recorded on the
memory card ( 110)
File size of still images and
movies
ND••••••••••AUTOCAM.SET UP
( 40)
Memory Card Indication:
flashing in red: No card
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images
• All indicators light in green when a memory card is played back.
• The remaining capacity indication varies depending on the recording
condition. The remaining number may sometimes not decrease or decrease
by 2 images at a time.