Canon 200 MC Camcorder User Manual


 
179
E
Additional
Information
Memory card caution phrases
You attempted to copy a copyright protected tape.
May also be displayed when an anomalous signal is
sent during Analog Line-in recording ( 93, 94).
Memory card not inserted into the camcorder
( 108).
The SD Memory Card is set for erasure prevention.
Replace the card or change the position of the
protect switch ( 107).
No images are recorded on the memory card
( 108).
A memory card error occurred. The camcorder
cannot record/play back. The error may be
temporary. If CARD ERROR disappears after 4
seconds and flashes red, turn the camcorderís
power off, remove the card and reinsert the card. If
changes to green, you can continue
recording/playback ( 113).
No free space remaining on the memory card.
Replace with another memory card or erase images
( 131).
File or folder numbers have already reached the
maximum value ( 111).
The image is recorded in a JPEG format or any
format that is not compatible with the camcorder,
or the image contains corrupted data ( 122).
The marked file cannot be edited ( 129).
Depending on the signal, some analog images
cannot be recorded on the memory card as still
image ( 116).
The cover or the memory card compartment is
open.
COPYRIGHT PROTECTED
DUBBING RESTRICTED
NO IMAGES
NO CARD
THE CARD IS SET FOR
ERASURE PREVENTION
CARD ERROR
CARD FULL
NAMING ERROR
UNIDENTIFIABLE
IMAGE
PRINT MARK ERROR
THIS IMAGE CANNOT
BE RECORDED
MEMORY CARD COVER
IS OPEN