Filter
Top Products
59
E
Using the Full
Range of Features
Returning the flash to the body
Press the flash down with your hand.
• Do not return the flash to the body while it is firing.
Caution:
• Do not fire the flash close to people’s eyes.
• Do not fire the flash at drivers while they are driving.
• Do not fire the flash with the flash bulb covered with your hand.
Notes:
• The practical range of the flash is approximately from 3 ft 3
3
/8 in (1 m) to
9 ft 10
1
/8 in (3 m). Depending on the recording conditions, the range
varies.
• Your camcorder automatically adjusts the flash exposure according to the
brightness of the subject (Flash exposure compensation). The flash fires to
perform flash exposure compensation before the main firing for taking
photos. When (Red-eye reduction auto) is set, the flash fires to perform
flash exposure compensation between the Super Night LED for red-eye
reduction and the main firing for taking photos. It takes about 1 second
between the lighting of the Super Night LED for red-eye reduction and the
main firing.
• In “Red-eye reduction auto” mode, the subject needs to look at the Super
Night LED in order to have red-eye reduction effective. The degree of
reduction varies on the distance to the subject and also on each individual.
• If the flash is forced to fire (Flash on) in a bright location, the effect of flash
photography sometimes may not be obtained.
• The flash does not fire in the following cases:
– When expouse is locked in Auto or Red-eye reduction auto mode.
Flash display changes to purple:
– When a shutter speed of 1/2000 or faster is set in the TAPE CAMERA
mode. However, in the case that “Flash on” is selected, the display of
the selected shutter speed flashes (in purple) for four seconds, then
changes to “1/1000” (yellow), and the flash fires.
The flash display flashes in red:
– When an abnormality occurs during charging ( 165).
The flash display disappears:
– When multi-image screen is selected.
– When you are recording movies onto a tape.
• The flash does not fire if does not appear green in the display when
you press the PHOTO button. Set it to “Flash on” mode when necessary.
• The (red-eye reduction auto) cannot be used in stitch assist mode.
• The flash cannot be used in the Night or Super Night recording program.
• When the flash is fired with a lens hood or an optional tele-converter
attached to the camcorder, its shadow may be recorded.
• When a tape recorded using a flash is played back on different equipment,
the image may flicker.