Canon 200 MC Camcorder User Manual


 
93
E
Editing
Copyright Signal
Certain pre-recorded software tapes are copyright protected. If you try to
play back such a cassette, “COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED” appears in the display for a few seconds and then the
camcorder displays a blank blue screen; you cannot view the contents of the
cassette.
If you try to record from such a tape via the digital cable “COPYRIGHT
PROTECTED DUBBING RESTRICTED” appears in the display; you cannot
record the contents of the tape.
1. Find a point on your recorded cassette slightly before the
section you wish to copy and set it to playback pause mode.
2. Press the REC PAUSE button on the wireless controller.
The camcorder enters record pause mode.
3. Start playback on the other digital device while you monitor
the picture.
4. Press the pause button.
Recording starts.
5. When you get to the point where you wish to stop
recording, press the stop button or the pause button.
Recording stops.
6. Stop playback on the other device.
Notes:
Blanks between recordings on the playback tape are recorded as
anomalous images on the tape that is being recorded to.
When dubbing to a tape via the DV terminal, make sure that AV \ DV is
not displayed on the screen. If so, set AV \ DV OUT to OFF ( 97).
Dubbing