Canon 200 MC Camcorder User Manual


 
24
E
Mastering
the Basics
Confirmation/Warning Beeps
The camcorder’s short operation confirmation beeps are indicated by ` in the
illustrations. Beeps sound upon certain camcorder operations such as when
you turn the camcorder on, during the self-timer countdown, right before
the camcorder’s automatic shut-off, and also upon any unusual condition of
the camcorder. Beeps are not recorded on the tape.
BEEP••••••••ON
SYSTEM
( 40)
To turn the beep off, open the menu and select SYSTEM. Then
select BEEP, set it to OFF and close the menu.
All camcorder sounds, including the shutter sound that sounds when
recording a still image onto a memory card will be turned off.
+
,
+
,
+
,
+
PLAY
(VCR)
CARD
CAMERA
CARD
PLAY
(VCR)
TAPE
CAMERA
TAPE
Demonstration Mode
You can see a demonstration of the camcorder’s main features. To see the
demonstration, do either of the following:
With no cassette or memory card inserted, turn the DEMO MODE on in
the TAPE CAMERA menu or CARD CAMERA menu and close the menu.
Leave the camcorder with no cassette or memory card inserted for five
minutes after turning it on.
+
,
+
CAMERA
CARD
CAMERA
TAPE
DEMO MODE•••ON
DISP.SET UP
( 40)
To turn the demonstration mode off, open the menu and select
DISP. SET UP. Then select DEMO MODE, set it to OFF and close
the menu.
Note:
To cancel the demo mode once it has begun: push any button, turn off the
power, load a cassette or insert a memory card.