Filter
Top Products
87
E
Using the Full
Range of Features
You can also choose to display camcorder data (shutter speed and exposure
settings) in cassette data codes.
To change, open the menu and select DISP.SET UP. Then select
DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T
and close the menu.
DATA CODE•••DATE/TIME
DISP.SET UP
( 40)
Setting the Data Code
Date/Time Camcorder data
Date/Time &
Camcorder data
Time
Date & Time
Date
DATA CODE
(tape only)
D/TIME SEL.
F1.8
1/250
F1.8
1/250
JAN. 1,2002
12:00:00 AM
12:00 AM
JAN. 1,2002
F1.8
1/250
F1.8
1/250
JAN. 1,2002
F1.8
1/250
12:00:00 AM
F1.8
1/250
12:00 AM
JAN. 1,2002
Notes:
• The data code will read “– – –” in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the
camcorder’s memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on OPTURA200 MC is played back on a different DV
camcorder, the data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS ( 173) has
been set to OFF through the menu.
Possible data code combinations for cassettes:
+
PLAY
(VCR)
TAPE