Filter
Top Products
130
E
Using a Memory Card
PRINT MARKS ALL ERASE
CARD OPER.
( 40)
Erasing All Print Marks
Make sure a memory card that has a still image recorded on it has been
inserted into the camcorder.
1. With a still image in the display, open the menu and select
CARD OPER.
2. Select PRINT MARKS ALL ERASE.
• ERASE ALL PRINT MARKS ? YES NO appears in the display.
3. Select YES.
• The print mark disappears from the still image.
4. Close the menu.
Notes:
• To cancel a print mark, move the frame to the print-marked still image, set
the number of prints to 0 (Zero) with the selector dial and press the
selector dial in. The print mark disappears.
• If there are a large number of images recorded on the memory card, it may
take time for a print mark to appear on a still image.
+
PLAY
(VCR)
CARD