Canon CR-1 MARK II Camcorder User Manual


 
8. Before calling the service technician (Warning)
-122-
10045
19 Specified End Date is earlier than Start Date. Input a date later than the Start Date as the End Date.
20
Length of acquired worklist item is too long.
The following tag number item(s) are cut off.
[XXXX] (DICOM TAG Number+DICOM TAG
Name)
The transfer data of the worklist server does not
meet the DICOM standards. Check the worklist
server settings.
21
Acquired worklist item format is invalid.
The following tag number item(s) are not acquired.
[XXXX] (DICOM TAG Number+DICOM TAG
Name)
10048
1 Invalid Values for Birth Date Input the correct birth date.
5
Patient Info. set as any of essential data items are
not entered.
Input the patient information that was set in the
essential data (see page 83).
6
The length of either of 5 Patient Name fields is too
long.
Shorten the length to 60 characters or less.
Shorten the length to 60 characters or less.
12 Invalid character was entered to the field.
Check the details of the displayed item, and enter it
again.
14
Line feed code cannot be entered to Study
Description field.
Delete the line feed code.
22
Character '\' or control character cannot be used for
Accession No.
Delete the backslash (\) and any control characters.
23
Character '\' or control character cannot be used for
Patient ID.
24
Character '\,' line feed code, or control character
cannot be used for Study Description.
Delete the backslash (\), line feed code and any
control characters.
29
Character '\', '=' or control code cannot be used for
Patient Name.
Delete the backslash (\) and any control characters.
30
Multi-byte character cannot be used for Patient
Name.
Delete the multi byte characters.
39
Out-of-Range Birth Date (A date earlier than 1869
or later than tomorrow is entered.)
Input the correct birth date.
40 Entered date is invalid for Birth Date.
42
A character/characters for Patient ID is/are not
supported by Specific Character Set.
Input using the specific character set.
43
A character/characters for Accession No. is/are not
supported by Specific Character Set.
44
A character/characters for Patient Name is/are not
supported by Specific Character Set.
45
A character/characters for Study Description is/are
not supported by Specific Character Set.
46
A character/characters for the field is/are not
supported by Specific Character Set.
47
A character/characters for the field is/are not
supported by Specific Character Set.
48
A character/characters for the field is/are not
supported by Specific Character Set.
49
Entered characters are not acceptable because they
do not match Specific Character Set.
Delete the single-byte Japanese kana characters.
50
Length of the acquired item is too long.
The following item(s) is/are cut off.
Check the information input in the magnetic card or
barcode.
module id message id Message Detail