Filter
Top Products
254
Trouble?
appears (in red) on the screen.
- A memory card error occurred. Turn off the camcorder.
Remove and reinsert the memory card. Initialize the memory
card if the display does not change back to normal.
and [End] appear (in red) on the screen.
- The memory card is full. Replace the memory card or delete
some recordings (A 81) to free some space on the mem-
ory card.
- The folder and file numbers have reached their maximum
value. Set 1 > q> [File Numbering] to [Reset] and
delete all the movies and photos (A 81) on the memory
card or initialize it (A 45).
Even after stopping recording, the ACCESS indicator does
not go off.
- The scene is being recorded on the memory card. This is not
a malfunction.
The red power/charge indicator flashes rapidly (
one flash at 0.5-second intervals).
- The temperature of the battery pack is outside its operating
range (approximately 0 – 40 °C (32 – 104 °F)). Remove the
battery pack, warm it or let it cool down, as necessary, and
try charging it again.
- Charge the battery pack in temperatures between approxi-
mately 0 °C and 40 °C (32 °F and 104 °F).
- The battery pack is damaged. Use a different battery pack.
COPY