Casio EX-FC300S Camcorder User Manual


 
136
Other Playback Functions (PLAY MENU)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * Date/Time
When the date and time settings are what you want, align the cursor with “Apply” and
then press [SET] to apply them.
To switch between 12-hour and 24-hour timekeeping, move the cursor to “am (pm)”
and “24h” (one of which will be displayed) and then use [8] and [2] to change the
setting.
NOTE
The date and time stamped into an image using the Time Stamp (page 165) cannot
be edited.
You cannot edit the date and time of an image that is protected.
You can input any date from 1980 to 2049.
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] *
p PLAY MENU” Tab * Rotation
1. Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2. When the displayed image is at the orientation you want, press
[MENU].
NOTE
Rotating a CS image causes all of the images in the CS group to be rotated. You
cannot rotate individual component image in a CS group.
Rotation of a panorama image is not supported.
Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
An image that has been protected or zoomed cannot be rotated.
The original (unrotated) version of the image will be displayed on the image menu
screen.
Editing the Date and Time of an Image (Date/Time)
[8] [2] Changes the setting at the cursor location.
[4] [6] Moves the cursor between settings.
Rotating an Image (Rotation)