Filter
Top Products
A-13
8. Use [8], [2], [4], and [6] to align the
reference point (the point where the red line
and the green line intersect) with the golfer’s
hip. Next, rotate the control dial to change
the angle of the green line so it runs from the
hip to the shoulder.
• You can also change the angle of the green line
by rotating the function ring.
9. Press [RING].
This starts playback. Use the lines to check the golfer’s swing plane.
Lines displayed in a movie image shot from the front of the golfer can be used to
analyze the swing.
1. Press [p] (PLAY) and then use [4] and [6] to display the movie of the
front-shot swing you want to analyze.
2. Press [SET] to start playback. When playback reaches the image of the
golfer addressing the ball, press [SET] again to pause playback.
• While playback is in progress, you can also use [4] (fast reverse) and [6] (fast
forward) to navigate the scene you want.
• Pressing [0] (Movie) while playback is in progress toggles the playback speed
between slow motion and normal speed.
• To record a still image of the current monitor screen contents (Motion Print),
pause playback and then press [0] (Movie).
3. Press [8] (DISP) to display parallel lines.
4. Press [RING].
To analyze a swing shot from the front
Green line Reference
point