Filter
Top Products
68
Snapshot Tutorial
You can configure the camera to save two images when shooting with HDR Art: one
image with HDR Art effects applied in accordance with the scene you selected plus
another normal (Program Auto) image without any effects applied.
1. Align the mode dial with [C] and then press [MENU].
2. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [6].
3. Use [8] and [2] to select “Double (HDR ART)” and then press [SET].
4. Use [8] and [2] to select “On” and then press [SET].
While “Off” is selected for the above step, only a single HDR Art image is saved
(normal image not saved).
5. Press the shutter button to shoot.
You can register up to 12 setups, based on snapshots shot with the camera, as
CUSTOM SHOT scenes. Selecting a registered CUSTOM SHOT scene configures
the camera with its settings.
. To register a CUSTOM SHOT scene
1. Align the mode dial with [C] (CUSTOM SHOT).
2. Press [SET].
• A message will appear if there are no CUSTOM SHOT scenes currently
registered. If there is one or more images that are supported for CUSTOM
SHOT scene registration, press [SET] to advance to step 5, below. Otherwise
proceed with step 3.
3. Use [8] and [2] to select
C
(Custom Scene) and then press [SET].
4. Use [8], [2], [4], and [6] to select “CUSTOM SHOT” (New Scene), and
then press [SET].
5. Use [8], [2], [4], and [6] to select a snapshot.
6. Use [8] and [2] to select “Save” and then press [SET].
Saving a Second Normal Image When Shooting With HDR Art
(Double (HDR ART))
Creating and Using Your Own Setups (CUSTOM SHOT)