Filter
Top Products
4-6
Cisco Video Surveillance 2500 Series IP Camera User Guide
OL-19273-02
Chapter 4 Viewing Live Video
Viewing Video through Third-Party Devices or Software
Viewing Video through Third-Party Devices or Software
You can allow users to access video streams from the IP camera through third-party mobile devices, or
through the VLC media player or equivalent software.
To do so, you must configure the RTSP Port option in the Advanced Setup window. This option enables
the IP camera to receive Real-Time Streaming Protocol (RTSP) commands. For more information, see
the
“Advanced Setup Window” section on page 3-11.
To access a primary MPEG-4 stream, configure Single MPEG-4 Stream, Dual MPEG-4 Streams, or
Dual Streams (MPEG-4 + MJPEG) for the Streaming Mode option in the Video window. These
settings lets you enable a primary MPEG-4 video stream, which is useful for providing third-party
devices. For more information, see the
“Video Window” section on page 3-19.
To access a secondary MPEG-4 stream, configure Dual MPEG-4 Streams for the Streaming Mode
option in the Video window. This setting lets you enable a secondary MPEG-4 video stream, which is
useful for providing third-party devices or software with a video stream that is at a lower resolution than
the primary stream. Some software and devices require this lower resolution, which is 352 x 240 for
NTSC or 352 x 288 for PAL. For more information, see the
“Video Window” section on page 3-19.
To access an MJPEG stream, configure Single MJPEG Stream or Dual Streams (MPEG-4 + MJPEG)
for the Streaming Mode option in the Video window. This setting lets you enable an MJPEG video
stream, which is useful for providing third-party devices. For more information, see the
“Video Window”
section on page 3-19
This section provides examples for how to access various video streams. For related information, see
Cisco Video Surveillance API Reference Guide.
Accessing the Primary MPEG-4 Stream by using VLC Player
In the following commands, replace username with your IP camera user ID, replace password with your
IP camera password, and replace ip_address with the IP address of the IP camera.
• To access the primary MPEG-4 stream with video and audio, enter either of these commands:
rtsp://username:password@i p_addres s/img/media.sdp
rtsp://username:password@i p_addres s/img/media.sav
• To access the primary MPEG-4 stream with video only, enter either of these commands:
rtsp://username:password@i p_addres s/img/video.sav
http://username:password@ip_address/img/video.asf
• To access the primary MPEG-4 stream with audio only, enter this command:
rtsp://username:password@i p_addres s/img/audio.sav
Accessing the Primary MPEG-4 Stream by using Devices or Software other than VLC Player
In the following commands, ip_address with the IP address of the IP camera. After you enter the
command, enter your IP camera user name and password when prompted.
• To access the primary MPEG-4 stream with video and audio, enter either of these commands:
rtsp://ip_address/img/media.sdp
rtsp://ip_address/img/media.sav
• To access the primary MPEG-4 stream with video only, enter either of these commands:
rtsp://ip_address/img/video.sav
http://ip_address/img/video.asf