Cisco Systems CIVS-IPC-2500 Security Camera User Manual


 
4-7
Cisco Video Surveillance 2500 Series IP Camera User Guide
OL-19273-02
Chapter 4 Viewing Live Video
Viewing Video through Third-Party Devices or Software
To access the primary MPEG-4 stream with audio only, enter this command:
rtsp://ip_address/img/audio.sav
Accessing the Secondary MPEG-4 Stream by using VLC Player
In the following commands, replace username with your IP camera user ID, replace password with your
IP camera password, and replace ip_address with the IP address of the IP camera.
To access the secondary MPEG-4 stream with video and audio, enter either of these commands:
rtsp://username:password@ip _address /img/media2.sdp
rtsp://username:password@ip _address /img/media2.sav
To access the secondary MPEG-4 stream with video only, enter either of these commands:
rtsp://username:password@ip _address /img/video2.sav
http://username:password@ip_address/img/video2.asf
To access the secondary MPEG-4 stream with audio only, enter this command:
rtsp://username:password@ip _address /img/audio2.sav
Accessing the Secondary MPEG-4 Stream by using Devices or Software other than VLC Player
In the following commands, ip_address with the IP address of the IP camera. After you enter the
command, enter your IP camera user name and password when prompted.
To access the secondary MPEG-4 stream with video and audio, enter either of these commands:
rtsp://ip_address/img/media2.sdp
rtsp://ip_address/img/media2.sav
To access the secondary MPEG-4 stream with video only, enter either of these commands:
rtsp://ip_address/img/video2.sav
http://ip_address/img/video2.asf
To access the secondary MPEG-4 stream with audio only, enter this command:
rtsp://ip_address/img/audio2.sav
Accessing the MJPEG Stream by using VLC Player
In the following commands, replace username with your IP camera user ID, replace password with your
IP camera password, and replace ip_address with the IP address of the IP camera.
To access the MJPEG stream with video and audio, enter either of these commands:
rtsp://username:password@ip _address /img/jpgmedia.sdp
rtsp://username:password@ip _address /img/jpgmedia.sav
To access the MJPEG stream with video only, enter either of these commands:
rtsp://username:password@ip _address /img/jpgvideo.sav
http://username:password@ip_address/img/video.mjpeg
Accessing the MJPEG Stream by using Devices or Software other than VLC Player
In the following commands, ip_address with the IP address of the IP camera. After you enter the
command, enter your IP camera user name and password when prompted.