Cisco Systems CIVS-IPC-2500 Security Camera User Manual


 
A-1
Cisco Video Surveillance 2500 Series IP Camera User Guide
OL-19273-02
APPENDIX
A
Using the IP Camera with Cisco VSM
Cisco Video Surveillance Manager (VSM) is a suite of powerful and flexible video surveillance
applications that interoperate with a wide range of devices and cameras to provide a complete,
standards-based video surveillance solution. VSM consists of modules to manage, archive, view, and
distribute video.
The following guidelines apply when you use the IP camera with VSM:
Obtaining the Required Driver Pack
To use the IP camera with VSM, you must download and install a driver pack. For information about
this driver pack, refer to your VSM documentation, which is available here:
http://www.cisco.com/web/solutions/ps/products.html#netcentric
The IP camera must be installed and configured as described in Chapter 2, “Getting Started.”
You must to create a separate user account with administrator privileges for each Media Server.
Configuration connections for a Media Server are limited just as they are for user sessions. Viewing
and managing video streams from VSM requires administrator-level privileges.
For information about how to configure a user account, see the “Video Window” section on
page 3-19.
A user with administrator privileges cannot be logged in to the IP camera and use VSM at the same
time
Cisco recommends that you configure video resolution (NTSC or PAL) from the IP camera
configuration windows.
For instructions, see the “Video Window” section on page 3-19.