Filter
Top Products
iDP3210 User’s Manual
2
CITIZEN
(2) When using the printer, remove the protective paper of the thermal head in the following procedures:
1) Open the printer cover.
2) Holding the paper guide of the platen roller section, pull it in the arrowed direction.
3) Pull out the protective paper in the arrowed direction.
4) In case the printer is not used for a long time period of time, set the protective paper to keep platen roller
away from thermal head.
CAUTION Install this printer on a flat and stable table.
Do not install this printer near to a heater or in the direct sunshine.
Do not use this printer in locations with high temperature, high humidity or heavy dirt. In
case of the occurrence of dew condensation, do not switch the power ON until it goes out