Filter
Top Products
iDP3210 User’s Manual
13
CITIZEN
4.5 How to Remove Remaining Roll Paper
(1) Open the printer cover.
(2) Holding the paper guide, pull it in the arrowed direction. The platen roller is detached from the print head
and the remaining paper can be pulled out.
CAUTION Be sure to use the paper guide for pulling out paper. (Opposite direction).
4.6 Removing Paper Jam
(1) Open the printer cover.
(2) Cut off the roll paper near the paper inlet.
(3) Detaching, from the chassis hook, the head springs on both sides by moving them in arrowed direction, lift
them up.
(4) Lift up the paper guide knob and the platen roller unit can be detached.
(5) Completely remove the roll paper remains inside of the paper course.
(6) Confirming direction of the platen roller unit, insert it into the inside of bush guide of chassis.
(7) Lightly pushing the platen roller unit, fit the head springs on both sides on the hook part.