Citizen iDP3210 Photo Scanner User Manual


 
iDP3210 User’s Manual
47
CITIZEN
n (Hex) Type
0
Canceling
90°-right- turned Characters
1
Specifying
90°-right- turned Characters
The initial value of n is "0".
(28) Specifying Absolute Positions (ESC $ n1 n2)
Code : [1B]h + [24]h + n1 + n2
*{0n1 FF}
{0 n2 1} Data is described in Hex code.
The printing start position is specified in the number of dots from the beginning of line.
The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1. Therefore, the
printing start position is equal to n1 + n2 x 256 from the beginning of line..
Specifying beyond the line end is ignored.
(29) Specifying Relative Positions (ESC ¥ n1 n2)
Code : [1B]h + [5C]h + n1 + n2
*{0n1 FF}
{0 n2 FF} Data is described in Hex code.
The printing start position is specified in the number of dots from the current position.
Rightward direction is taken as plus and leftward direction asminus.
To specify N dot in minus (left) direction, use a complement of N for assignment.
– N dots = 65536 – N
The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1.
Specifying exceeding the end of line is ignored.