D-Link DCS-1130 Security Camera User Manual


 
21D-Link DCS-1100/1130 User Manual
Section 4 - Conguration
Network Setup allows you to congure your LAN and Internet conguration.
DHCP Connection: This allows your camera to get an IP address automatically
from your router or Internet service. If you are not sure which LAN settings to
use, try using DHCP mode rst.
Static IP Address: This allows you to manually set the IP address information
for your camera.
IP Address: Enter the IP address the camera should use.
Subnet Mask: Enter the subnet mask that the camera should use.
Default Gateway: Enter the default gateway that the camera should use.
Primary DNS: Enter the IP address of the primary DNS server that the camera
should use.
Secondary DNS: Enter the IP adress of the secondary DNS server that the camera
should use.
Note: If you need to use a static IP address and you do not know the network information, contact your Internet Service
Provider (ISP) for assistance.
Setup > Network Setup