Filter
Top Products
26D-Link DCS-1100/1130 User Manual
Section 4 - Conguration
Encode Type: This sets the video codec used for the video stream. You
can choose MPEG-4 or MJPEG (JPEG). Internet Explorer browsers can view
both MPEG-4 and MJPEG video streams, and non-IE browsers can only
view MJPEG video streams.
Resolution: This sets the display resolution of the video stream. If the
Resolution is dierent than the Sensor Output size, the video will be
shrunken or enlarged to the Resolution size you set here.
FPS: This sets the target number of frames per second (FPS) for the video
stream. Higher frame rates will provide smoother video.
bps: This sets the target bitrate of the video stream. Higher bitrates will
provide better quality video. When the Encode Type is set to MJPEG, you
cannot change the bps setting. Also, available bps settings may change
depending on what the Encode Type, Sensor Output, Resolution, and FPS
settings are set to.
JPEG Quality: This sets the JPEG quality of any manual snapshots you take when this video prole is selected
RTSP URL: This setting allows you to set a sux for your camera’s RTSP URL so you can view your camera’s video with this video
prole’s settings. For example, if you enter “mpeg4” as your RTSP URL setting and your camera’s IP is 192.160.0.30, you can view
your camera’s video with these settings through 192.160.0.20/mpeg4.
Setup > Audio and Video
You may congure four video proles with dierent settings for your camera. You may also set up dierent proles for your
computer and mobile display. In addition, you may congure the audio (speakers and microphone) settings for your camera.