Filter
Top Products
33D-Link DCS-1100/1130 User Manual
Section 4 - Conguration
Here, you can set the camera to take snapshots when motion is detected.
Snapshots can be sent to an e-mail address and/or to an FTP server.
Enable Snapshot: Check this box to enable the snapshot feature.
Event Based (Motion Detection): This will set the camera to take a snapshot
whenever motion is detected.
Continuous (FTP only): This will set the camera to take snapshots continuously
at intervals specied in FTP Server > Interval below. You can only save to an FTP
server when taking continuous snapshots.
Scheduled (FTP only): This will set the camera to take snapshots continuously
at intervals specied in FTP Server > Interval below according to schedule you
dene by checking days and entering the times you want to record between.
You can only save to an FTP server when taking scheduled snapshots.
E-mail Address: When checked, the camera will send the snapshots it takes to
the e-mail address specied in the following text boxes. If you do not know what
to enter for the User Name, Password, or SMTP Mail Server, contact your e-mail
service provider for details.
User Name: Enter the username or login name for your e-mail account.
Password: Enter the password for your e-mail account.
SMTP Mail Server: Enter the SMTP server for your e-mail account.
Sender E-mail Address: Enter the e-mail address you want to appear as the “From:”
e-mail address in the snapshot e-mail.
Setup > Snapshot