Filter
Top Products
45D-Link DCS-1100/1130 User Manual
Appendix A - Installing the DCS-1100/1130 on a Router Without UPnP
Installing the DCS-1100/1130 on a Router
Without UPnP
If you connect your camera to an Internet router that does not support UPnP, you
can assign your camera to a DMZ connection on your router. For more details,
refer to your router’s User Manual for more details on conguring your camera
to use a DMZ connection.
If you have multiple cameras you wish to connect, or if you do not want to use
DMZ, follow these steps to allow multiple remote access to your cameras:
1) Identify your camera on the network
2) Assign a local IP address and port for your camera
3) Determine your router’s WAN IP Address (Enable Remote Viewing)
4) Open virtual server ports for your router (Enable Remote Viewing)
1) Identify Your Camera on the Network
• Log in to your camera’s web interface from a computer on the same local
(home) network
• Click on the MAINTENANCE tab, and select Device Management
• Enter a unique Camera Name for your camera
Note: Giving your camera a unique name is important when setting up
multiple cameras on your network.