Filter
Top Products
28D-Link DCS-1100/1130 User Manual
Section 4 - Conguration
Enable Night Mode: Check this box to enable Night Mode. Night mode allows
the camera to use a longer shutter speed when the camera is in a low-light
environment. If the camera is in an area where there is sucient lighting, Night
Mode will not aect the video stream.
Shutter: This sets the longest shutter speed Night Mode will use when Night
Mode is enabled and the camera is viewing a low-light scene.
Light Source: Here you can set the kind of lighting used in the area your camera
is monitoring to improve the image quality of the video.
Enable Microphone: Checking this box will enable you to listen to audio picked
up by the camera’s microphone. This will allow you to hear what is happening
near your camera.
Volume: This sets the volume level of the incoming audio.
Note: Higher frame size, frame rate and bit rates will give you better video quality,
but they will also require more network bandwidth. For best viewing results on a
mobile phone, we suggest setting the frame rate to 5 fps and bit rate to 20 Kbps.
After making any changes, click the Save Settings button to save your changes,
or click the Don’t Save Settings button to discard your changes.