Filter
Top Products
29D-Link DCS-1100/1130 User Manual
Section 4 - Conguration
This option allows you to set up Motion Detection on your IP camera. In order to
use motion detection, you must rst check the Enable Video Motion checkbox.
You can then click on the video window and draw motion detection zones by
clicking and dragging your mouse. Red areas indicate areas that will be monitored
for motion.
Sensitivity: This setting adjusts how sensitive the camera will be to motion, where
100% will be the most sensitive setting and 0% will be the least sensitive setting.
Drawing Mode: This will allow you to draw motion detection zones when clicking
and dragging, or erase motion detection zones when clicking and dragging,
depending on which option you have selected.
Clear: Clicking this button will clear all motion detection zones.
After making any changes, click the Save Settings button to save your changes,
or click the Don’t Save Settings button to discard your changes.
Setup > Motion Detection