Epson R380 Photo Printer User Manual


 
58 Solving Problems
Data error. The document cannot be
printed.
See the documentation for the device
transmitting the data. This error occurs
when the transmitting device does not send
data properly.
Cannot recognize the device. Make sure you’ve inserted your memory
card correctly. If you connected a USB
storage device, make sure you’ve inserted
the disk correctly.
Cannot recognize the memory card
or disk.
Make sure you’ve inserted the memory card
or storage disk correctly. If so, check to see
whether there is a problem with the card or
disk.
A problem occurred while
formatting. Formatting cancelled.
Retry the procedure. If the error reoccurs,
there may be a problem with your memory
card or storage disk. Check to see whether
there is a problem with the card or disk,
then try again.
An error occurred while saving.
Save cancelled.
Cannot create a folder on the
memory card or disk. Operation
cancelled.
Insert a new memory card or storage disk
and try again.
Print head cleaning failed. Try cleaning the print head again. If the error
message reoccurs, contact Epson as
described on page 62.
Backup Error
Error code
XXXXXXXX
A problem occurred and backup was
cancelled. Make a note of the error code
and contact Epson as described on page 62.
Message Solution