60 Solving Problems
Paper Feeding Problems
■ If paper doesn’t feed, remove it from the sheet feeder. Flip through the stack to
separate the sheets a little. Then reload the paper against the right edge, and
slide the left edge guide against the paper (but not too tightly).
■ Do not load too many sheets at once (up to 20 sheets of photo paper or 120
sheets of plain paper). See your User’s Guide for more information.
■ If paper is jammed, follow these steps to clear the jam:
1. Press the x
Start button to eject the jammed paper. If the jammed paper
is not ejected, go to the next step.
2. If the paper is stuck near the sheet feeder or front tray, gently pull it out.
If the paper is stuck inside the printer, press the P
On button to turn it
off. Open the printer cover and remove any paper inside, including any
torn pieces. Do not pull it backward however; this can damage the sheet
feeder. Close the printer cover, then turn the printer back on.