93
• The value for custom paper is higher than the maximum scan size. Width needs to equal
279 mm or less and length needs to equal 420 mm or less.
• The value for custom paper is higher than the maximum scan size. Width needs to equal
11 inch or less and length needs to equal 16.53 inch or less.
• The value for custom paper is higher than the maximum scan size. Width needs to equal
xxx pixel or less and length needs to equal xxx pixel or less.
Cause: A value exceeding the limit applicable to the scan area of the scanner
was specified.
User response: To specify a custom paper size, specify the value that is smaller than
the value applicable to the device.
• The value for custom paper is greater than the maximum scan size. Width need to less
equal 259mm.
• The value for custom paper is greater than the maximum scan size. Width need to less
equal 10.24inch.
• The value for custom paper is greater than the maximum scan size. Width need to less
equal 2048pixel.
Cause: A value exceeding the limit applicable to the scan area of the scanner
was specified.
User response: To specify a custom paper size, specify the value that is smaller than
260mm (10.24inch, 2048pixcel)
• The resolution must be less or equal to xxx dpi when scanning in Gray Scale.
• The resolution must be less or equal to xxx dpi when scanning in Color.
• Cannot specify Long Page Scan. Width need to less equal 400dpi.
Cause: There is a limit on the resolution when gray-scale scanning, long page
scanning or color scanning is used.
User response: Specify a resolution value that is below the indicated xxx dpi.
• Cannot specify Gray Scale with Custom resolution.
• Cannot specify Color with Custom resolution.
Cause: Custom resolution was designated when Gray Scale or Color was
designated.
User response: Designate a resolution value other than Custom.
• Cannot specify Gray Scale with duplex document.
Cause: Duplex scanning is specified with Gray Scale specified.
User response: At duplex scanning, select Black/white binary or Half tone for the
[Image type].