Filter
Top Products
105
8. Appendix
8.1 Relevant Image Scanner Specification
Product: fi-4010CU
Type: Desktop
Image sensor: Reduced optical system
Operating method: Document fixed Flat bed, Automatic Document Feed (ADF),
Single-sided reading
Light source: Fluorescent tube (White)
Basic resolution: 600 dpi
Output resolution
1
: 50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal): 8 bit 256 levels
Grayscale output: Enabled (8 bits)
Halftone Patterns: Dither matrix (1 pattern)
Color (24bit) output: Enabled
Flat bed scanning speed: Monochrome 8 sec or less (A4, 200 dpi)
Color 10sec or less (A4, 150dpi)
ADF scanning speed
2
: Monochrome, Single sided: 10 pages per minute (200 dpi, A4,
80g/m
2
)
Color, Single sided: 3.3 pages per minute (150 dpi, A4, 80g/m
2
)
ADF paper chute capacity: Maximum 25 sheets (A4, 80g/m
2
, High quality paper, normal
temperature and humidity)
Document size: Flat bed Maximum 210 mm
x 297 mm
ADF Minimum 114mm
x 140 mm
Maximum 216 mm
x 355 mm
Supported regular paper
3
: A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
White level follower: Disabled
Brightness / Threshold / Contrast : 255 steps
High light / Shadow : 255 steps (at Color / Grayscale scanning)
Gamma pattern: Internal types are not available. (cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
Image processing function: Reverse image, De-Screen, 256 Color, 8 Color
1
. Change processing is done inside the driver.
2
. This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
3
. Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.