Filter
Top Products
41
Post-Imprinter (Printing after scanning, and on the back side of documents)
Prints on documents using the imprinter installed in rear part of the scanner.
In this case, it prints on the back side of documents after scanning.
Therefore, the printing is not included in a scanning result.
* [Pre-Imprinter] and [Post-Imprinter] cannot be used at the same time.
♦ Y Offset (Printing)
Specifies Y Offset from the edge of the original for the placement of printing. See
"Relevant Image Scanner Specification" in the Appendix because the standard value
specified here depends on the device.
♦ Direction (Printing)
Specifies the printing direction of endorsement strings. When printing from the head of
strings against to the direction of scanning, designate “Top to Bottom”. And when printing
from the tail of strings against to the direction of scanning, designate “Bottom to Top”
However, see the “Relevant Image Scanner Specification” described in the Appendix since
the available settings depend on the device.
♦ Font (Printing)
Specifies the printing orientation of characters.
Vertical : ABCD 0123
Horizontal :
Available settings vary depending on your scanner. Refer to “Relevant Image Scanner
Specification” in the Appendix.
♦ Bold
The imprinter string is outputted with bold font.
Available settings vary depending on your scanner. Refer to “Relevant Image Scanner
Specification” in the Appendix.
Printing direction