Fujitsu P3PC-E807-01ENC2 Photo Scanner User Manual


 
111
Product: fi-4120C
Type: Desktop
Image sensor: Color CCD (Reduced optical system)
Operating method: Automatic Document Feed (ADF), Simultaneous double-sided
scanning
1
,
Long page scanning
Black&White : Max 216mm
x 711mm
Grayscale, Color
2
: Max 216mm x 610mm
Light source: Fluorescent tube (White)
Basic resolution: 600 dpi
Output resolution: 50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal): 10 bit 1024 levels
Grayscale output: Enabled (8 bits)
Halftone Patterns: Dither matrix (can be downloaded), Error diffusion
Color (24bit) output: Enabled
ADF scanning speed
3
: B/W
Single sided: 25 pages per minute (200 dpi, A4, 80g/m
2
)
Double sided: 12.5 pages per minute (200 dpi, A4, 80g/m
2
)
(=25 screens per minute)
Color
Single sided: 25 pages per minute (150 dpi, A4, 80g/m
2
)
Double sided: 12.5 pages per minute (150 dpi, A4, 80g/m
2
)
(=25 screens per minute)
ADF paper chute capacity: Maximum 50 sheets (A4, 80g/m
2
, High quality paper, normal
temperature and humidity)
Document size: Minimum 53mm
x 74 mm
Maximum 216mm
x 355.6mm
Supported regular paper
4
: A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
White level follower: Enabled
Brightness / Threshold / Contrast : 255 steps
High light / Shadow : 255 steps (at Color / Grayscale scanning)
1
Individual setting : Disabled
2
In case of color or grayscale, the firmware version of scanner has to be “D00” or latter.
3
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
4
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.