Filter
Top Products
33
selected (Double Letter) paper size range is used for scanning, the output will adjust to
the page size detected.
(However, in case of fi-4860C, fi-4990C, this function is not dependent on the setting
of [Paper size] because these scanners always scan documents as the maximum paper
size and detect the paper size from the scanned data.)
However, some detection cannot be corrected for example, an unfixed long image,
folded corner, document has uneven width for the length of the page.
This function becomes effective only when scanning with the ADF.
(It may detect incorrectly when this function is chosen with flat bed scanning.)
This function does not work properly for some applications.
Black Background
If it is selected, the outside of document paper becomes black by using black
background during scanning.
This option may not be supported for some scanners. See "Relevant Image Scanner
Specification" in the Appendix.
♦ Priority
Setup for speed versus automatic document size detection.
Select a small value when scanning speed is the higher priority.
Select a large value when document detection accuracy is the higher priority.
Priority can only be setup when [Automatic Page Size Detection] is selected at [Automatic
Size and Skew Detection].
♦ Overscan
This function makes the scanned images larger than the original documents by adding
margins. This option is available only when [Black Background] is selected for [Automatic
Size and Skew detection].