Filter
Top Products
80
6.3 Events Tab
On the Events tab, an application can be specified to be started automatically by “Scanner
events” such as “pushing buttons on the scanner” or “placing documents to the scanner”.
(The Events tab is not displayed if the device does not support this function.)
♦ Scanner events
Select a “scanner event” from the list box to start an application. Please select the item to
set up from the following events.
"Auto check of paper supply": When placing paper to the ADF.
"Start button" or "Scan button": When pushing the "Start" or the "Scan" button of the
scanner.
"Send to1-9": When pushing the "SendTo" button of the scanner.
(“Scanner events” may not be displayed depending on scanners.)
♦ Send to this application
Mark on the check box of an application to be started by the operation specified in the
above [Scanner events]. Multiple applications can be specified. When two or more
applications are specified, a dialog box appears to select one to be started by the operation.
♦ Disable device events
If these functions are not used, mark on this check box.
* If the above settings are not activated by clicking [OK] or [Apply], please reboot the PC.