Fujitsu P3PC-E807-01ENC2 Photo Scanner User Manual


 
23
ADF (Back Side)
Scans the documents on the device's automatic document feeder (ADF).
Here, only back sides are scanned.
Note.
To specify duplex scanning, the number of copies designated should be based on the
number of pages, not the number of paper sheets. In other words, one original with a front
and back is regarded as two pages.
Image Mode
Selects an image mode for scanning the image.
Select a corresponding image mode from the list.
Black & White
Scans data by using the fixed threshold binary, black-and-white. Distinguishes black
from white by the setting in the "Threshold" of "Scanning Parameter". This scanning
mode is suitable for scanning line drawings and text documents.
Halftone (Dither)
Scans data using the halftone processing, with dithering or error diffusion. Uses the
patterns set in "Halftone" to simulate data in black-and-white. Selection of built-in
dithered patterns or error diffusion (not supported by some device models) is allowed.
This scanning mode is suitable for scanning images containing light and shadow such
as a photograph.
Gray scale
Scans data using 256-level monochrome gray scale. Light and shade in photographs
can be represented with greater fidelity. This scanning mode employs far more
memory than the Black & White mode.
Some versions of the scanner do not support this scanning mode. For details contact the
retail store where the device was purchased.
Automatic separation
Scans data distinguishing line drawing from photograph image.
If this option is selected, the line drawing part is scanned using "Black & White," and
the photograph part is scanned using "Halftone". This information is most suitable for
documents containing both photographs, and line drawings or text.
Some scanner models do not support this option. See "Relevant Image Scanner
Specification" in the Appendix.
SEE (Selective Edge Emphasis)
Scans data using the halftone processing and emphasizes line drawings and text. This
option is most suitable for emphasizing only text of documents containing both
photographs and text.
Some scanner models do not support this option. See "Relevant Image Scanner
Specification" in the Appendix.