Filter
Top Products
32
English
QR34642
Setups
This section explains preparations for recording - setting up the DVD video camera/recorder and
battery.
Setting Up the DVD Video Camera/Recorder
HOLDING DVD VIDEO CAMERA/ RECORDER
Insert your right hand from the bottom of DVD
video camera/recorder up to the base of your
thumb.
Put your hand in a
position where you can
easily operate the REC
button and the Zoom
lever.
Adjust the length of
hand strap so that the
DVD video camera/
recorder is stable when
you press the REC button with your thumb.
Note:
Do not adjust the hand strap while holding the DVDvideo
camera/recorder: Doing this could cause the DVD video
camera/recorder to fall and be damaged.
ATTACHING LENS CAP
Pass the provided string through the hole in the lens cap and attach it to the hand strap of DVD video
camera/recorder.
1 Use the string to attach the cap to the DVD video
camera/recorder.
2 Push the both sides of cap inward and attach it
over the lens.
Note:
• Always keep the lens cap on when not using the DVD
video camera/recorder, to protect the lens.
• Whenrecording, attachthe lenscap tothehand strapby
hookingthetab insidethe capontostrap forcomfortable
shooting.
Caution:
Do not lift the DVD video camera/recorder by
holding the viewfinder or LCD monitor: If the
viewfinderorLCDmonitorcomesoff,theDVDvideo
camera/recorder will fall.
Push and fit