64
English
QR34642
●Switching the information display mode
You can switch the display mode of on-screen information:
Press the DISPLAY button.
The full and minimum display modes will alternate.
• Full display mode: All types of information will appear.
• Minimum display mode: The recording mode (see 1 on
page 62) and recording status (see 9 on page 62) will appear. If
the DVD video camera/recorder has warning information, a
warning message will appear.
Note:
The DVD video camera/recorder does not record thedate and time asa part of image. However, this information during
recording will be recorded with image as data which can be checked on Disc Navigation screen during playback (See
“Information Display During Playback” on page 71).
●Display when recording an image of yourself
When recording with the LCD screen facing the same direction as the lens, the
operating status will appear, and in addition, the battery remaining level will
blink when the battery has almost no remaining charge.
The following operating status indicator will light or blink to give warning
message to user. The message can be checked when returning the LCD monitor
180° to the original status from the status in which the LCD screen was facing
the same direction as the lens.
) :The disc has almost no free space.
:Write-protected disc or locked card is loaded.
:You are attempting to record a still on DVD-R
disc.
No display :Disc or card that cannot be used has been loaded.
* :The disc or card is full, or you are attempting to
record a copy-guarded image.
Note:
• Ifthe LCDscreen isset facing the same direction as the lens, the LCD screen willdisplay amirror image (left and right
reversed).
• If the LCD screen is set facing the same direction as the lens, you can also view subject image in the viewfinder.
• Although you can switch tothe manualfocus, exposureand on-screen display modeseven during recording with LCD
screen facing the same direction as lens, they will not appear on the screen.
Operating status/
warning message
Battery remaining
level