82
English
QR34642
Note:
• Thewhitebalancesetusingthe“Set”optionwillbestored
in memory until it is reset.
• Do not use a colored object when setting the white
balance: The appropriate tint cannot be set.
• Do not block the infrared sensor with hand, etc.
• If a generally available tele or wide-conversion lens is
used,theauto whitebalancemaynotoperatedepending
on the recording conditions. If this happens, set to the
mode tomatchtherecordingconditions, ormanuallyset
the white balance.
• Be sure to remove the lens cap before turning the DVD
video camera/recorder on: If the DVD video camera/
recorder is turned on with the lens capped, the white
balance will not work normally.
Infrared sensor block