Filter
Top Products
46
English
QR34642
VIEWING SUBJECT THROUGH VIEWFINDER
1 Pull out the viewfinder.
2 Turn the diopter control knob to adjust the focus
to suit your eyesight.
Note:
• If the LCD monitor is open approximately 90°, the
viewfinder will be off.
• Focusing will not be correct unless the viewfinder is
pulled out.
VIEWING IMAGE ON LCD MONITOR SCREEN
If you open the LCD monitor, you can monitor subject image on the LCD screen.
1 Open the LCD monitor.
The LCD monitor has a portion where you can
hook your finger. Hook the finger there to open
the monitor.
●Range where the LCD monitor can
be moved
The LCD monitor can be opened up to
approximately 90º.
If the LCD monitor is open 90°, it can be tilted with
the screen down as much as 90°, and can also be
tilted with screen up and turned up to 180° so the
screen faces in the same direction as the lens.
If the LCD monitor is turned 180° so the screen faces
in the same direction as the lens during recording,
subject image will also appear in the viewfinder as
an mirror image (left/right reversed).
Tilt the LCD monitor to adjust its vertical angle so
that you can see the screen easily.
Note:
• Be sure to open the LCD monitor approximately 90º
before changing its vertical angle.
• Donot record fora prolonged time with theLCD monitor
turned approximately 180
ºin closecontactwiththeDVD
video camera/recorder body:Doingthis could causethe
DVDvideocamera/recorderandLCDmonitortobecome
hot.
Diopter control
Pull out the viewfinder.
90˚
180˚
Hook your finger
90º
(Bottom)